1700°C High-Temperature Elevator Furnace VOC Exhaust Gas Purification Treatment Furnace

1700℃ high-temperature lifting furnace with VOC tail gas purification system, chamber size 500×500×500mm, electric screw lifting & manual loading, U-shaped MoSi₂ heaters, ±1℃ control accuracy and ±3℃ temperature uniformity. Supporting regenerative VOC purification unit with over 99% removal efficiency and 95% heat recovery

Elevator Furnace

1700°C High-Temperature Elevator Furnace VOC Exhaust Gas Purification Treatment Furnace

Rating Temperature:1700℃
Power Supply AC:3-phase 5-wire, 380V
Heating Element Installation:Around the chamber
Debinding Port:Located on top, Φ60mm
Temperature Uniformity:±3℃
Temperature Control Accuracy:±1℃ (Integrated circuit control, no overshoot)

Product Video

Brief Introduction:

  • The principle is to oxidize organic substances in exhaust gas into corresponding carbon dioxide and water at high temperature, thereby purifying the exhaust gas and recovering the heat released during the decomposition of the exhaust gas. The three-chamber series VOC purification furnace achieves a waste gas decomposition efficiency of over 99% and a heat recovery efficiency of over 95%.

Working Principle

  • The principle is to heat organic exhaust gas to above 760°C (depending on the specific composition), so that the VOC in the exhaust gas is oxidized and decomposed into carbon dioxide and water. The high-temperature gas generated by oxidation flows through specially made ceramic heat storage bodies, heating the ceramic to "store heat," and this "stored heat" is used to preheat the subsequently entering organic exhaust gas. This saves the heating energy consumed in raising the exhaust gas temperature. The ceramic heat storage chambers should be divided into two (or more) chambers, and each heat storage chamber successively goes through procedures such as heating, heat release, and purging, repeating cyclically and working continuously. After the heat storage chamber "releases heat," an appropriate amount of clean air should be immediately introduced to purge the heat storage chamber (to ensure a VOC removal rate of over 98%). Only after purging is completed can it enter the "heat storage" procedure. Otherwise, residual VOCs will be discharged with the flue gas to the chimney, thereby reducing treatment efficiency.

Applicable Exhaust Gases

  • Types of organic exhaust gases applicable: hydrocarbons such as alkanes, alkenes, ketones, ethers, esters, aromatic hydrocarbons, and benzene compounds.
  • Organic high-concentration, small air volume.
  • Exhaust gas containing multiple organic components, or organic components that frequently change.
  • Exhaust gas containing components that easily cause catalyst or activity deterioration.

Performance Features

  • Can treat almost all exhaust gases containing organic compounds.
  • Can treat organic exhaust gas with low air volume and high concentration.
  • Great flexibility in handling organic exhaust gas flow.
  • Can adapt to changes and fluctuations in the composition and concentration of VOCs in organic exhaust gas.
  • Insensitive to a small amount of dust and solid particles entrained in the exhaust gas.
  • Highest thermal efficiency among all thermal combustion purification methods (approximately 95%).
  • Under suitable exhaust gas concentration conditions, self-sustaining operation can be achieved without adding auxiliary fuel.
  • High purification efficiency (over 99% for three chambers).
  • Low maintenance workload, safe and reliable operation.
  • Organic deposits can be periodically removed, and heat storage bodies can be replaced.
  • Low pressure loss of the entire device.
  • Long service life of the device.

Application Scope: Exhaust gas treatment in packaging and printing such as ceramics, targets, printing, drying, compounding and cleaning processes, inks, adhesives, coating agents, fountain solutions, car wash water, plastic reverse printing, plastic surface printing, film packaging printing, paper gravure printing, flexographic printing, screen printing, offset printing, letterpress printing, oil printing, pad printing, metal printing, tinplate printing, commercial web printing, and sheet-fed printing.

ItemSpecification
Rating Temperature1700℃
Chamber Size500×500×500 mm; Overall dimension: 2180×1200×1200 mm
Design PowerPower auto-adjust with heating rate, manual setting available, Max. 40KW
Power Supply AC3-phase 5-wire, 380V
Continuous Working Temperature1700℃ (display temp)
Temperature SensorB-type thermocouple, range 0-1820℃, 2-point measurement
Heating Element InstallationAround the chamber
Temperature Control Accuracy±1℃ (Integrated circuit control, no overshoot)
Temperature Uniformity±3℃
Debinding PortLocated on top, Φ60mm
Heating RateFully adjustable; Max 20℃/min, Min 1℃/h
Heating ElementU-type 1800 MoSi₂ heating rod
Furnace BodyInner frame: 304 stainless steel; Outer shell: CNC machined, polished, pickled, phosphated, powder coated & high-temperature baked; Industrial grey, mirror finish, export quality, anti-oxidation, acid & alkali resistant, high temp resistant, easy cleaning
Body StructureAir-cooled double-layer structure with air guide baffles. Circulating cooling for conductive strips to prevent oxidation and good working environment
Loading Platform MovementManual in/out, electric lead-screw lifting
Sealing between Furnace Opening & PlatformStep cross sealing, angled refractory; large opening angle, angle reduces gradually when closing
Loading Capacity200KG, movable track at furnace bottom
Refractory MaterialVacuum formed high-purity lightweight alumina fiber board; furnace bottom vulnerable area adopts high-purity lightweight alumina bubble board. Low heat storage, thermal shock resistant, crack & slag free, energy saving ≥80% vs traditional furnaces
Insulation Material3-layer insulation: 1350 high alumina wool, domestic 1700 alumina fiber board, imported 1800 fiber board. Special shaped lightweight high-purity alumina material for furnace opening vulnerable zone, energy saving ≥80% vs traditional furnaces
Shell Surface TempShell temperature <25℃ during long-time continuous operation
Communication InterfacesRS485, RS232, USB
Protection FunctionsIntegrated module, dual-loop control & protection; protection against overshoot, undershoot, thermocouple break, phase loss, overvoltage, overcurrent, overtemperature, current feedback, soft start
Dual Control SystemTwo sets of closed-loop SCR phase-shift trigger control; continuously adjustable voltage/current/power, constant voltage / constant current / constant power mode. Current inner loop + voltage outer loop for current limiting, protect heating elements from surge current and voltage
Temperature Curve SettingIntelligent temperature controller, PID / APID / MPT AI regulation, auto-tuning & self-learning, no overshoot or undershoot. 50-segment programmable control, arbitrary ramp slope, loop jump, run, pause, stop, editable during running for smooth curve
Program Segments30-segment program control, touch screen display
Accessories Included6 pcs MoSi₂ rods, 1 pc mullite hollow board, 2 sets fixture, 1 crucible tongs, 1 pair high temperature gloves
Warranty1-year free warranty for whole furnace; heating elements excluded, free replacement for natural failure within 2 months
Connect with Us Today
Phone Phone:+86-13937922703
Email Email:luoyanganjing@gmail.com