1600°C Vacuum Atmosphere Elevator Annealing Furnace

1600℃ vacuum atmosphere lifting annealing furnace with hydraulic bottom door, 650×650×650mm chamber, multi-gas atmosphere option, two-stage rotary vane pump, 30-segment program control and RS485 communication

Elevator Furnace

1600°C Vacuum Atmosphere Elevator Annealing Furnace

Rated Temperature:1600℃
Long-term Working Temperature:500–1600℃
Control Range:80~1600℃
Chamber Size:L650 × W650 × H650 mm
Temperature Sensor:B-type thermocouple
Heating Element:MoSi₂ heating rod

Product Video

Technical Parameters:

  • The AJ-ZQSS series vacuum atmosphere elevator furnace, as shown in the figure, consists of a vertical main unit (single chamber), vacuum system, gas charging system, water cooling system, and electrical control system. The furnace lining is made of vacuum-formed high-purity alumina lightweight material.
  • Silicon-molybdenum rods are used as heating elements. It is a dedicated equipment specially developed for laboratories of universities and research institutes, as well as industrial and mining enterprises, for sintering, melting, analysis, and production of ceramics, metallurgy, electronics, glass, chemicals, machinery, refractory materials, new material development, special materials, building materials, metals, non-metals, and other compound materials.
  • The control panel is equipped with an intelligent temperature regulator, control power switch, main heating start/stop buttons, voltage and current meters, and a computer interface, so that the working status of the system can be observed at any time. This product adopts reliable integrated circuits, has a good working environment, and is anti-interference. At maximum temperature, the outer shell temperature of the furnace is ≤45°C, greatly improving the working environment. Microcomputer program control, programmable curves, fully automatic heating/cooling, and temperature control parameters and programs can be modified during operation—flexible, convenient, and simple to operate.
  • Temperature control accuracy: ±1°C, no overshoot; constant temperature accuracy: ±1°C. Fast heating speed, maximum heating rate ≤20°C/min (non-linear).
  • The furnace chamber material is entirely made of high-purity alumina lightweight material, featuring high service temperature, low heat storage, resistance to rapid heating and cooling, no cracking, no slag falling, and good insulation performance (energy-saving effect is more than 60% that of old-style electric furnaces). Reasonable structure, inner and outer double-layer furnace shell, air-cooled heat dissipation, which can greatly shorten the test cycle.
ItemSpecification
Rated Temperature1600℃
Max Operating Temperature1600℃
Long-term Working Temperature500–1600℃
Chamber SizeL650 × W650 × H650 mm
Control Range80~1600℃
Temperature SensorB-type thermocouple
Heating Element InstallationAround the chamber (front, rear, left, right)
Temperature Control Accuracy±1℃ (Integrated circuit control, no overshoot)
Temperature Uniformity≤±5℃ within effective heating zone; measured by 5 thermocouples after holding at 1200℃ for 1 hour
Heating RateAdjustable, maximum 20℃/min
Cooling Rate1000–500℃: 5–10℃/min; 500–300℃: 2–5℃/min; Eurotherm controller, min. 0.5℃/h
Heating ElementMoSi₂ heating rod
Furnace BodyCNC machined, polished, pickled, phosphated, powder coated and high-temperature baked; two-tone design, anti-oxidation, acid & alkali resistant, high temperature resistant, easy to clean
Body StructureAir-cooled double-layer furnace shell with air guide baffles, circulating cooling for conductive strips to prevent high-temperature oxidation
Door Opening TypeBottom hinged door, hydraulic lifting
Sealing between Loading Platform & Furnace MouthStep soft sealing with elastic high-temperature sealing strip to absorb thermal expansion of refractory materials
Refractory MaterialVacuum formed high-purity lightweight alumina material; lightweight alumina bubble board for furnace mouth and bottom. Low heat storage, thermal shock resistant, crack & slag free
Insulation Material3-layer insulation: aluminosilicate fiber board, alumina fiber board, alumina polycrystalline fiber board, energy saving ≥80% vs traditional furnaces
Shell Surface TempShell temperature <45℃ during long-time non-stop operation
Protection FunctionsIntegrated control module, dual-loop control & protection; protection against overshoot, undershoot, thermocouple break, phase loss, overvoltage, overcurrent, overtemperature, soft start; pressure interlock protection for overpressure risk
Control System10-inch true-color touch screen + PLC centralized control, data log & report export to PC; closed-loop SCR control, phase-shift / zero-cross trigger, constant voltage / constant current / constant power mode, current limiting protection
Water Cooling ZonesFurnace top, furnace opening, furnace door, outer shell
Permissible AtmosphereNitrogen, Argon, Oxygen, etc.
Vacuum Degree-0.1Mpa (gauge), equipped with two-stage rotary vane mechanical pump
Gas Inlet System3 sets of float flowmeter + manual valve (customizable range / quantity); max slight positive pressure 0.05Mpa (gauge)
Exhaust SystemExhaust pipe on furnace top, inner diameter 80mm
Pressure Relief SystemRelief port on top between liner and heating elements for discharging redundant gas
Display ContentsReal-time temperature, segment No., segment time, remaining time, power percentage, voltage, current, etc.
Push ButtonsImported push buttons, service life>100,000 times with LED indicator
Temperature Curve SettingIntelligent controller with PID / APID / MPT AI regulation, auto-tuning & self-learning, no overshoot or undershoot. 30-segment programmable control, arbitrary ramp slope, cycle jump, run, pause, stop, editable during running
Program Segments30 segments (50 segments optional); flexible allocation for multiple curves, storable and recallable
Communication PortRS485, max 1200m; PC remote operation, curve editing, data logging; history curve & report storage, logging interval 1s~1h

 

Connect with Us Today
Phone Phone:+86-13937922703
Email Email:luoyanganjing@gmail.com