1200°C Elevator Furnace with Hot Air Stirring

1200℃ hydraulic lifting furnace, split structure, equipped with 310S variable-frequency hot air stirring fan, preheated air inlet and independent tail gas purifier. Heated by high-temperature alloy resistance strips with PLC interlock control for sintering new materials, metallurgy and ceramics.

Elevator Furnace

1200°C Elevator Furnace with Hot Air Stirring

Max Operating Temperature:1200℃
Long-term Working Temperature:1150℃
Control Range:80~1200℃
Power Supply AC:380V
Design Power:Approx. 150KW
Effective Heating Zone Size:L×W×H:2000×1000×1200 mm

Product Video

Elevator Furnace Technical Parameters

  1. The elevator furnace has a split design between the control system and the furnace chamber. The furnace lining is made of vacuum-formed high-purity alumina lightweight material.
  2. High-temperature alloy resistance strips are used as heating elements.
  3. The control panel is equipped with an intelligent temperature regulator, control power switch, main heating start/stop buttons, voltage and current meters, and a computer interface, so that the working status of the system can be observed at any time.
  4. Reliable integrated circuits are adopted, providing a good working environment and anti-interference performance. At maximum temperature, the outer shell temperature of the furnace is ≤45°C. Microcomputer program control, programmable curves, fully automatic heating/cooling, and temperature control parameters and programs can be modified during operation—flexible, convenient, and simple to operate.
  5. Temperature control accuracy: ±1°C, no overshoot; constant temperature accuracy: ±1°C. Fast heating speed, maximum heating rate ≤45°C/min.
  6. The furnace chamber material is entirely made of vacuum-formed high-purity alumina lightweight material, featuring high service temperature, low heat storage, resistance to rapid heating and cooling, no cracking, no slag falling, and good insulation performance. Reasonable structure, inner and outer double-layer furnace shell, air-cooled heat dissipation, which can greatly shorten the test cycle.
ItemSpecification
Max Operating Temperature1200℃
Long-term Working Temperature1150℃
Control Range80~1200℃
Effective Heating Zone SizeL×W×H:2000×1000×1200 mm
Overall Furnace Dimension3500×2000×4200 mm, track length 2500 mm
Power Supply AC380V
Design PowerApprox. 150KW
Heating Element InstallationEvenly arranged around chamber and bottom
Temperature Control Accuracy±1℃
High-Temperature Stirring Fan310S material, variable frequency adjustable
Temperature Uniformity±3℃
Gas Inlets10 inlets at lower part of both sides of chamber with preheating function; atmosphere preheated by tail gas purification furnace before entering chamber
Tail Gas Purification FurnaceHorizontally mounted on furnace top, treatment capacity 160m³/h, independent temperature control; start & stop automatically controlled by PLC
Heating RateAdjustable; Max 20℃/min (non-linear), Min 1℃/h (non-linear)
Temperature SensorK-type thermocouple, measuring range 0-1320℃
Dual Temperature ControlHeating zone around chamber + bottom independent control
Heating ElementHigh-temperature alloy resistance strip (around chamber and bottom)
Furnace BodyCNC machined, polished, pickled, phosphated, powder coated and high-temperature baked; two-tone design, anti-oxidation, acid & alkali resistant, high temperature resistant, easy to clean
Body StructureAir-cooled double-layer furnace structure with air guide baffles, circulating cooling for conductive strips to prevent high-temperature oxidation
Loading Platform OpeningHydraulic lifting structure
Sealing between Furnace Opening & PlatformStep cross sealing structure with angled refractory; large opening angle, angle reduces gradually when closing
Loading Capacity2 tons
Platform Lifting TypeElectric mechanical lifting
Refractory MaterialVacuum formed high-purity lightweight alumina fiber folded block; lightweight alumina bubble board for furnace mouth and bottom. Low heat storage, thermal shock resistant, crack & slag free, energy saving ≥80% vs traditional furnaces
Insulation Material3-layer insulation: high alumina wool, alumina blanket, alumina fiber board, energy saving ≥80% vs traditional furnaces
Shell Surface TempShell temperature <45℃ during long-time non-stop operation
Protection FunctionsIntegrated control module, dual-loop control & protection; protection against overshoot, undershoot, thermocouple break, phase loss, overvoltage, overcurrent, overtemperature, current feedback, soft start
Control ModeClosed-loop SCR trigger control, phase-shift trigger or zero-cross trigger; continuously adjustable voltage/current/power, constant voltage / constant current / constant power mode. Current inner loop + voltage outer loop for surge protection of heating elements
Display ContentsTemperature, segment No., segment time, remaining time, power percentage, voltage, current, etc.
Push ButtonsImported push buttons, service life>100,000 times with LED indicator
Temperature Curve SettingIntelligent controller with PID / APID / MPT AI regulation, auto-tuning & self-learning, no overshoot or undershoot. 30-segment programmable control, arbitrary ramp slope, cycle jump, run, pause, stop, editable during running with smooth curve fitting
Program Segments30-segment program control; flexible allocation for multiple curves, storable and recallable
PLC FunctionPLC automatically manages temperature, fan speed, purification furnace on/off and gas inlet valves according to heating curve
Accessories Included2 pcs heating elements, 2 sets fixture, 1 crucible tongs, 1 pair high temperature gloves
Warranty1-year free warranty for whole furnace; heating elements excluded, free replacement for natural failure within 3 months
Connect with Us Today
Phone Phone:+86-13937922703
Email Email:luoyanganjing@gmail.com